23
OPERATING THE VEHICLE
PARKING
B
Parking Brake Lever
To avoid personal injury:
Before dismounting vehicle
A
Always set parking brake and lower all
implements to the ground.
Leaving transmission in gear with the engine
stopped will not prevent from rolling.
A
Stop the engine and remove the key.
1. Stop the vehicle on a level surface.
2. To set the parking brake, depress the brake pedal and
pull the lever to park.
3. To release the parking brake, push release button and
push down the parking brake lever. When the parking
brake is released, the parking brake warning lamp in
the Easy Checker(TM) goes off.
A
If the vehicle is operated with the parking brake
applied, the parking brake will be damaged.
ACCESSORY
B
12V Electric Outlet
The 12 volt receptacle is located on the front-panel. An
auxiliary light or other devices may be connected to this
connector.
C
This outlet is activated when the key switch is in
either the "ON" or "OFF" position.
When the plug is not used, pull it out. Be careful that
leaving the plug inserted causes the battery to run out.
C
Do not connect a light or other device that draws
more than 120 watts to this connector, or the
battery may discharge very rapidly or the outlet
may fail.
A
Do not use as a cigarette lighter.
A
Do not use when wet.
B
Utility Box
(1) Parking brake lever
(2) Release button
(A) "RELEASE"
(1) 12V electric outlet
(1) Utility Box
Summary of Contents for RTV1140 CPX
