Coupling the machine
32
Coupling to the lift
link drawbar
The factory-supplied PTO shaft only allows for coupling to the pending
attachment. The PTO shaft supplied is too short for coupling to the lift
link drawbar. For a longer PTO shaft, please contact your dealer.
Couple the rotary rake to the lift link drawbar with a fixing pin.
Secure the fixing pin with a safety splint.
Take the height-adjustable parking stand out of the transport
holder bracket and fit it to the drawbar.
See »Coupling to the lift link drawbar«, page 32.
Stowing the height-
adjustable parking
stand [+]
After coupling, remove the height-adjustable parking stand [+] and fit
and secure it to the transport holder.
Switch off the tractor and secure it.
Pull the pin on the parking stand.
Remove the parking stand.
Fit the parking stand to the transport holder and secure it with a
fixing pin.
50 mm
Pin
PTO shaft
Ensure the minimum spacing
In the work position, the space between the PTO shaft and the pin
must never be less than 50 mm. Otherwise the PTO shaft may be
damaged, for example when driving over an undulation in the
ground. Damaged PTO shafts can cause injury to persons or
damage the machine.
Safety splint
Fixing pin
Transport holder
Parking stand
