![background image](http://html.mh-extra.com/html/kubota/r540/r540_operators-manual_2008671105.webp)
system by operating the control levers, and
remove the starter key.
• Always remove the bucket and attachment and
use the lift-arm-support when servicing the
machine with the loader lift arms raised.
Greasing the front attachments
1. Apply the grease to the grease fittings on the front
attachments indicated by the arrows in the following
illustrations.
(1) Quick coupler pin (2 places)
(2) Bucket link pin (1 place)
(3) Lift arm attachment pin (2
places)
(4) Bell crank arm pin (3 places)
(5) Bucket cylinder bottom pin (1
place)
(6) Lift cylinder rod pin (2 pla-
ces)
(7) Lift cylinder bottom pin (2
places)
Greasing the rear frame
1. Apply the grease to the rear frame at 1 grease
fitting.
(1) Grease fitting
Greasing the articulation joint
1. Apply the grease to the articulation joint at 2 grease
fittings.
(1) Grease fitting
Greasing the steering cylinder bearing
1. Apply the grease to the steering-cylinder-bearing at
the 2 grease fittings.
(1) Grease fitting
DAILY CHECK
PERIODIC SERVICE
R540
101
Summary of Contents for R540
