HYDRAULIC UNIT
42
B
Float Control
Place both the draft control lever and the position control
lever in the float position to make the lower links move
freely along with the ground conditions.
B
3-point Hitch Lowering Speed
To avoid personal injury:
A
Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to two or more seconds.
The lowering speed of the 3-point hitch can be controlled
by adjusting the 3-point hitch lowering speed lever.
REMOTE HYDRAULIC CONTROL SYSTEM
The hydraulic auxiliary control valves can be installed up
to triple segments.
It is not possible to use triple segments with flow control
valve.
B
Remote Control Valve
The standard tractor is equipped with double acting valve.
A
Double acting valve with detents and self cancelling:
This valve may be placed in the detent mode. The
lever will stay in this position until the pressure reaches
a predetermined level or a cylinder reaches the end of
its stroke. Then it will automatically return to neutral.
B
Remote Control Valve Lever
The remote control valve lever directs pressurized oil flow
to the implement hydraulic system.
(1) Ground surface
(2) Implement penetration limit
(3) Light soil
(1) 3-Point hitch lowering speed lever
(A) "FAST"
(B) "SLOW"
(C) "LOCK"
(1)
(2)
Remote control valve lever 1
Remote control valve lever 2
(X)
(Y)
(Z)
"REARWARD"
"FORWARD"
"DETENT POSITION"
