29
INTELLIPANEL(TM) CONTROL
B
Basic Information Monitor/Performance Monitor
The information required for jobs can be selected and displayed on the LCD screen.
The basic information monitor serves to display 2 of the following 5 types of data.
The performance monitor serves to display 2 types of data picked up from the list below.
(Changing the display is discussed at the end of this section.)
C
List of types of information displayed on the basic information monitor
C
List of types of information displayed on the performance monitor
(1) Basic information monitor
(2) Performance monitor
Display
Remarks
Reference
page
Clock
Elapsed time
(hour meter)
---
Trip A
A
Displays the trip measured from the previous
resetting.
A
With the "Trip" displayed and selected, hold down
[SET UP/00] switch. The setting goes back to "0".
---
Trip B
---
Travel speed
---
Selected
screen
Display
Remarks
Reference
page
1/6
Travel speed
A
The "Average travel speed" is based on the speed
since the last reset action was performed.
A
With the "Average travel speed" displayed and
selected, hold down [SET UP/00] switch. The
setting goes back to "0.00".
A
The travel speed displayed does not account for
wheel slip.
---
Average travel
speed
---
Engine rpm
---
Summary of Contents for M7131
