Kubota M7040SU, Operator'S Manual

Page: 56 / 90

38 HYDRAULIC UNIT
B
Hydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following.
Though this information may not be applicable to all types of implements and soil conditions, it is useful for general
conditions.
Implement Remarks
Soil condition Top link
mounting holes (1) Position control lever Gauge wheel (1) Telescopic
stabilizers
Moldboard plow
Light soil
Medium soil
Heavy soil
3 or 4
2 or 3
2 or 3
Position control
YES/NO Loose
Insert the set-pin
through the slot on
the outer tube that
align with one of
the holes on the
inner bar.
For implements
with gauge wheels,
lower the position
control lever all
way.
Disc plow
---
2, 3 or 4
Harrow (spike,
springtooth, disc
type)
--- 2 or 3
Sub-soiler ...
Weeder, ridger...
--- 3
YES
Tighten
Telescopic
stabilizer should be
tight enough to
prevent excessive
implement
movement when
implement is in
raised position.
For implements
with gauge wheels,
lower the position
control lever all
way.
Earthmover,
digger, scraper,
manure fork,
rear carrier.......
YES/NO
Mower (mid-and
rear-mount type)
Hayrake,
tedder......
NO