Kubota M6-101-M6-111, Operator'S Manual

Page: 121 / 205

93 HYDRAULIC UNIT
B
Adjusting the flow rate
To avoid the possibility of personal injury or death
be aware of the following when making
adjustments:
A
The 3-point hitch operation is influenced by the
combination of the adjustment of the flow
control valve and the engine speed.
A The 3-point hitch may rise slowly or not at all at
low engine rpm.
A
The 3-point hitch may rise suddenly if engine
rpm is increased, or, flow control adjustment is
changed.
C Flow control
The remote control valve with flow control may be added
for the following purposes.
1. The attachments that are connected with the auxiliary
control valve can be independently adjusted for flow
rate.
2. To operate within limits, the remote control valves (1)
and/or (2) and the 3-point hitch at the same time
without one affecting the other.
3. To maintain within limits, the constant speed of an
attachment (hydraulic motor RPM, for example) when
connected to the remote control valves (1) and/or (2).
A
At slower engine speeds the total hydraulic flow rate
may be inadequate for simultaneous operation of the
remote control valves (1) and/or (2) and the 3-point
hitch, or operation of an attachment connected to the
remote control valves (1)(2). Under these conditions,
the engine speed must be increased to provide
additional hydraulic flow.
(1) Remote control valve with flow control
(2) Remote control valve with flow control
(3) Flow control knob for valve (1)
(4) Flow control knob for valve (2)