Kubota M108DC, Operator'S Manual

Page: 59 / 124

39 3-POINT HITCH & DRAWBAR
3-POINT HITCH
B
Selecting the holes of Lower Links
There are 2 holes in the lower links. For most operations
the lifting rods should be attached to the (B) hole.
A
The lifting rods may be attached to (A) for greater
lifting force.
B
Selecting the Top Link Mounting Holes
Select the proper set of holes by referring to the
"Hydraulic Control Unit Use Reference Chart" in Hydraulic
Unit section.
If the hydraulic unit is set for draft control, draft response
is more sensitive when an implement is connected to the
lower set of top link mounting holes. If draft control is not
required, it is recommended to use the top set (1).
B
Drawbar
Remove the drawbar if a close mounted implement is
attached.
1 . Make preparations for attaching
implement.
(1) Lower link
(2) Lifting rod holes: (A), (B)