Recovery, loading and transport
33
Transport on a flat bed trailer
!
Place the loading ramps on the transport vehicle at an angle of
10° to 15°. Observe the track width. Safely attach the ramps to
the transport vehicle to make sure they cannot slide while driv-
ing upwards.
!
Bring the excavator exactly into line with the ramps and drive up straight. Lower the dozer onto the loading
area.
!
Turn swivel frame by 180° until the front attachments face the rear of the transport vehicle.
For securing the vehicle, tie down the points as shown in the figure.
The corresponding eye bolts must be screwed in at the rear weight
(2 pieces, not included in the scope of delivery).
Adhere to the safety rules (page 13) and the safety
rules for transport (page 30).
Do not turn or steer while driving up the ramps; if necessary, reverse the excavator and drive up again
after realigning it.
Caution! Danger!
No person is allowed to stand on the loading area during swivelling. Risk of bruising.
Take care during swivel operations. The front attachments could hit the transport vehicle. This could
damage the transport vehicle and the excavator.
STOP
STOP
STOP
