manualshive.com logo in svg

Kubota KJ-S130VX, Operator'S Manual

Share
Download
Kubota KJ-S130VX Operator'S Manual Download Page 3

ENGLISH

FOREWORD

You are now the proud owner of a KUBOTA Diesel Engine Generator. This gen-
erator is a product of KUBOTA quality engineering and manufacturing. It is
made of fine materials, under a rigid quality control system.  And will give you
long, satisfactory service. To obtain the more (productive) use of your genera-
tor, please read this manual carefully. It will help you become familiar with the
operation of the generator, and contains many helpful hints about generator
maintenance. It is KUBOTA's policy to utilize  as quickly as possible every ad-
vance in our research. The immediate use of new techniques in the manufac-
ture of products may cause some small parts of this manual to be outdated.
KUBOTA distributors and dealers will have the most up-to-date information.
Please do not hesitate to consult with them.

3

 SAFETY FIRST

This symbol, the industry's "Safety Alert Symbol", is used throughout this
manual and on labels on the machine itself to warn of the possibility of personal
injury. Read these instructions carefully. It is essential that you read the instruc-
tions and safety regulations before you attempt to assemble or use this unit.

3

 

DANGER

 :

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

3

 

WARNING 

:

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

3

 

CAUTION

:

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

IMPORTANT

 :

Indicates that equipment or property damage could result
if instructions are not followed.

NOTE

 :

Gives helpful information.

Summary of Contents for KJ-S130VX




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands