＿
10
＿
COLD STARTING PROCEDURE
This Handheld Blower is equipped with a
fuel primer and a choke system. To start a
“cold” engine properly, perform the following
procedure:
STARTING AND STOPPING PROCEDURE
BEFORE STARTING THE ENGINE:
Fill the fuel tank as instructed in the BEFORE OPERATION
section of this manual (page8). Rest the Handheld Blower on the ground. Make sure that the area
is clear of any broken glass, nails, wire, rocks or other debris. Keep all bystanders, children and
animals away from the working area.
1. Pump the primer bulb at the bottom of
the carburetor until fuel can be seen
flowing through the fuel return line to
the fuel tank. (Flowing fuel should be
almost clear, not foamy or full of
bubbles.)
2. Move the choke lever to the closed ( )
position.
3. Move the stop switch to the “ON”
position.
4. (1) Press the throttle trigger.
(2) Move the throttle setting lever to half
position.
(3) Release the throttle trigger.
(4) Release the throttle setting lever.
(Throttle is kept in half position.)
Primer Bulb
Choke Lever
START (ON)
STOP SWITCH
Idle Position
Throttle Setting Lever
STOP
Starter Grip
Fuel
Return
Line
Full Throttle
Position
Throttle Trigger