Section 6: Troubleshooting
9/21/22
24
Section 6: Troubleshooting
Troubleshooting Chart
Problem
Cause
Solution
Lower hitch pins on implement
will not lock into auto-lock hooks
Driveline stub shaft not aligned/seated all
the way in trunnion opening
Separate from implement slightly then
engage and disengage power take-off
slightly and re-hitch
Driveline bent
Contacting frame or drawbar
Replace driveline and correct
interferences
Lock handle difficult to move
Pivot points need lubricated
Spray pivot points with multi-purpose
spray lube generously