Kubota GZD15, Workshop Manual

Page: 70 / 271

GZD15, WSM GENERAL
G-55
Bushing Replacing Tools
Application : Use to press out and to press fit the bushing.
1. For small end bushing
2. For idle gear bushing
Crankshaft Bearing 1 Replacing Tool
Application : Use to press out and press fit the crankshaft
bearing 1.
A 145 mm (5.71 in.)
B 20 mm (0.79 in.)
C 100 mm (3.94 in.)
D 19.90 to 19.95 mm (0.7835 to 0.7854 in.)
E 21.90 to 21.95 mm dia. (0.8622 to 0.8642 in. dia.)
F 25 mm (0.79 in.)
a 6.3 (250 .)
b 6.3 (250 .)
A 150 mm (5.91 in.)
B 20 mm (0.79 in.)
C 100 mm (3.94 in.)
D 19.90 to 19.95 mm (0.7835 to 0.7854 in.)
E 21.90 to 21.95 mm dia. (0.8622 to 0.8642 in. dia.)
F 25 mm (0.98 in.)
a 6.3 (250 .)
b 6.3 (250 .)
0000001476E
[Press Out]
A 135 mm (5.31 in.)
B 72 mm (2.83 in.)
C 1.57 rad. (40 )
D 10 mm (0.39 in.)
E 22 mm (0.87 in.)
F 20 mm dia. (0.79 in. dia.)
G 48.90 to 48.95 mm dia. (1.9251 to 1.9271 in. dia.)
H 43.90 to 43.95 mm dia. (1.7283 to 1.7303 in. dia.)
[Press Fit]
A 130 mm (5.12 in.)
B 72 mm (2.83 in.)
C 1.57 rad. (40 )
D 9 mm (0.35 in.)
E 24 mm (0.95 in.)
F 20 mm dia. (0.79 in. dia.)
G 68 mm dia. (2.68 in. dia.)
H 39.90 to 39.95 mm dia. (1.5709 to 1.5728 in. dia.)
0000001477E
KiSC issued 04, 2006 A