GZD15, WSM
ENGINE
1-S26
Fuel Camshaft
1. Remove the screws and draw out the camshaft with the gear
on it.
2. Remove the retaining plate (1).
3. Remove the screws, then draw out the injection pump gear (3)
and fuel camshaft (2) with the governor fork assembly.
(When reassembling)
A
Hook the governor spring (7) to the fork lever 2 (6) as shown
in the figure before installing the fork lever assembly to the
crankcase.
Oil Pump and Crankshaft Gear
1. Remove the oil pump gear (6).
2. Remove the oil pump (5).
3. Remove the collar (4), O-ring (3) and crankshaft oil slinger (2).
4. Remove the crankshaft gear (1) with a puller.
(When reassembling)
A
Install the collar (4) after aligning the marks on the gear. (See
the photo at "Idle Gear".).
Connecting Rod
1. Remove the connecting rod caps (1).
(When reassembling)
A
Align the marks (a) with each other. (Face the marks toward
the injection pump.).
A
Apply engine oil to the connecting rod screws and lightly screw
it in by hand, then tighten it to the specified torque.
If the connecting rod screw won't be screwed in smoothly,
clean the threads.
If the connecting rod screw is still hard to screw in, replace it.
(1)
Retaining Plate
(5)
Fork Lever 1
(2)
Fuel Camshaft
(6)
Fork Lever 2
(3)
Injection Pump Gear
(7)
Governor Spring
(4)
Governor Sleeve
0000000862E
(1)
Crankshaft Gear
(4)
Crankshaft Collar
(2)
Crankshaft Oil Slinger
(5)
Oil Pump
(3)
O-ring
(6)
Oil Pump Gear
0000000863E
(C) Piston and Connecting Rod
Tightening torque
Connecting rod screw
26.5 to 30.4
2.7 to 3.1
19.5 to 22.4 ft-lbs
(1)
Connecting Rod Cap
(a)
Mark
0000000865E
KiSC issued 04, 2006 A
Summary of Contents for GZD15
