Kubota D722-E4, Operator'S Manual

Page: 12 / 42

SAFE OPERATION 6
EN
GLISH
1. Keep warning and caution labels clean and free from obstructing material.
2. Clean warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing warning and caution labels with new labels from your local
KUBOTA dealer.
4. If a component with warning and caution label(s) affixed is replaced with a new part, make
sure the new label(s) is (are) attached in the same location(s) as the replaced component.
5. Mount new warning and caution labels by applying to a clean dry surface and pressing any
bubbles to the outside edge.
A Replace fuel pipes and lubricant pipes with their hose
clamps every 2 years or earlier whether they are
damaged or not. They are made of rubber and age
gradually.
A
When servicing is performed together by two or more
persons, take care to perform all work safely.
A
Keep a first aid kit and fire extinguisher handy at all times.
12. WARNING AND CAUTION LABELS
Part No.19077-8724-1 or 16667-8724-1
(55mm in diameter) (37mm in diameter)
Part No.TA040-4957-1
Do not get your hands close
to engine fan and fan belt.
13. CARE OF WARNING AND CAUTION LABELS
E.book Page 6 Wednesday, October 7, 2020 7:17 PM