Kubota BX1870, Operator'S Manual

Page: 52 / 93

HYDRAULIC UNIT 34
AUXILIARY HYDRAULICS
On the tractor hydraulic outlet is provided.
B
Hydraulic Outlet
Hydraulic outlet is useful when adding hydraulically
operated equipment such as front end loader, front blade,
etc.
When implement is attached
1. Remove the block cover.
2. Attach the block outlet cover. (option)
(The block outlet cover is standard part for KUBOTA
Implements)
3. Route the implement inlet, outlet and return pipes as
shown in the illustration.
A
For hydraulic outlet, be sure to use the control valve of
the "Power beyond type" (with relief valve) and third
line return to tank for the operation of hydraulic block.
MOWER LIFT LINKAGE SYSTEM
B
Cutting Height Control Dial
When mounting the Mid-mount mower, turn the cutting
height control dial to the desired height.
For further details, refer to the operator's manual of
ROTARY MOWER RCK60B-23BX, RCK54P-23BX,
RCK54-23BX, RCK48P-18BX, and RCK48-18BX.
When operating the tractor without Mid-mount mower:
1. Move the hydraulic lever rearward to raise the mower
rear links to the highest position.
2. Set the cutting height control dial to "TOP" position.
If this is not done, damage of the mower rear link can
result.
(1) Block cover
(2) Block outlet cover (option)
(3) Outlet
(4) Inlet (A) Return port
(B) To implement (outlet)
Max. flow
14 L/min
(3.7 U.S.gals./min)
No relief valve in
the hydraulic block.
(C) From implement (inlet)
(1) Cutting height control dial
(2) Hydraulic control lever
(1) Mower rear link