Kubota BH92 Assembly Instructions Manual Download Page 4

1

TO THE DEALER

1. This manual contains procedures intended to assist

the dealer in unpacking and assembling the product
before delivering to the customer.
The customer's purchase is based on confidence in
both the product and your store.  Observe the
procedures in this manual to assemble and adjust
equipment for your customer's safety and satisfaction.
When fully assembled, check function of each part and
feature.

2. The following safety alert symbol marks and

indications are found throughout this manual in steps
where particular attention is required so as to ensure
your safety and to avoid product damage.  Observe
the instructions in these warnings where indicated.

SAFETY

To prevent accidents, read through the following items
before starting work, and always regard safety when
working. It is your responsibility to ensure your safety on
the job.

1. Preparations

(1) Select a work site which is level, has sufficient

space, and is not close to dangerous objects.

(2) Avoid poorly ventilated rooms. Asphyxiation from

exhaust fumes is always a possibility that
accompanies running engine.

(3) Working clothes which may be pinched or caught

in the equipment must not be worn. Loose
clothing can cause serious injury or death.

(4) Always wear a mask and protective goggles

during work when dust or flying debris may be
thrown by equipment.

2. Assembly and adjustments

(1) Before assembling equipment, read the assembly

instructions for the product to become familiar
with the equipment and procedures.

(2) Use only adequate and required equipment, tools

and instruments (e.g. torque wrench, battery
hydrometer and etc.).

(3) Set the parking brake and block wheels to prevent

machine (or tractor) movement.

(4) Lower the attachment or implement to the ground

before assembling or adjusting equipment.

Indicates an imminently
hazardous situation which, if not
avoided, will result in death or
serious injury.

Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.

Indicates a potentially
hazardous situation which, if not
avoided, could result in minor or
moderate injury.

Indicates that equipment or
property damage could result if
instructions are not followed.

Gives helpful information

Summary of Contents for BH92





















Reviews: