Kubota BH92, Assembly Instructions Manual, Page: 14 / 20

11
3. Attach the rear bracket in place.
4. Tighten a bolt only one of the front of a sub frame and
lift the back end of the sub frame using a hoist.
A Be sure to apply a nylon strap to the back end of the
sub frame for hoisting it.
A
If the rear of the sub frame is raised too much with a
crane, it will hit the fuel tank. Take much care not to hit
it when raising the rear of the sub frame.
5. Temporarily tighten the bolts and nuts in place.
(1) Rear bracket
(2) 2 - M14 x 30 bolts
2 - M14 spring lock washers
Tightening torque: 124 to 147 N·m
(12.6 to 15.0 kgf·m, 91.5 to 108.4 lbf·ft)
(1) Sub frame
(2) 1 - M16 x 60 bolt
1 - 5/8 hardened plain washer
1 - M16 spring lock washer
1 - M16 nut
(1) 3 - M16 x 60 bolts
3 - 5/8 hardened plain washers
3 - M16 spring lock washers
3 - M16 nuts
Tightening torque: 196 to 225 N·m
(20.0 to 23.0 kgf·m, 145 to 166 lbf·ft)