Kubota B3300SU, Operator'S Manual

Page: 42 / 79

PTO 26
B
Stationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brakes and place blocks at the tires.
2. Make sure the shift levers are at NEUTRAL, and start
the engine.
3. Set the Rear-PTO gear shift lever to engage "ON"
position.
4. Set the engine speed to provide recommended rear
PTO speed.
5. Dismount the seat and tilt up quickly (engine will stop
if there is a delay in tilting up the seat).
A If the PTO system is engaged and you stand up from
the seat or the seat is not tilted forward, the engine
stops automatically after standing up.
(1) Seat
(2) Clutch pedal
(3) Rear-PTO gear shift lever "ON" (Engaged)
"OFF" (Disengaged)