TRANSMISSION
B1220, B1620, B1820, WSM
3-S22
(EU)
Clearance between Shift Fork and Shift Gear Groove or Shifter
Groove
1. Insert the fork into the shift gear groove and measure the
clearance with a feeler gauge.
2. If the clearance exceeds the allowable limit, replace it.
9Y1210272TRS0032US0
Clearance between Gear and Shaft
1. Measure the gear I.D. with a cylinder gauge, and then shaft
O.D. with an outside micrometer.
2. Measure the O.D. of two needles in the needle bearing with an
outside micrometer.
3. Clearance is the difference between the gear I.D. and the sum
of shaft O.D. and two needles O.D..
4. If the clearance exceeds the allowable limit, replace it.
9Y1210272TRS0033US0
Clearance between shift
fork and shift gear
groove
Factory specification
0.03 to 0.4 mm
0.002 to 0.1 in.
Allowable limit
0.5 mm
0.02 in.
Clearance between shift
fork and shift groove
Factory specification
0.03 to 0.3 mm
0.002 to 0.1 in.
Allowable limit
0.5 mm
0.02 in.
Clearance between
F.W.D. shaft and
17T-15T gear
Factory specification
0.027 to 0.067 mm
0.0011 to 0.0026 in.
Allowable limit
0.10 mm
0.0039 in.
F.W.D. shaft O.D.
Factory specification
21.967 to 21.980 mm
0.86485 to 0.86535 in.
17T-15T gear I.D.
Factory specification
28.007 to 28.021 mm
1.1027 to 1.1031 in.
Needle O.D.
Factory specification
2.994 to 3.000 mm
0.1179 to 0.1181 in.
KiSC issued 07, 2011 A
Summary of Contents for B1220
