KÜBLER SPOR
T GMBH | SERVICE
KÜBLER SPORT GMBH |
SERVICE
ASSEMBLY INSTRUCTION
| HAIGER POLE ASSAULT COURSE
5
Examination after installation
If the equipment is not installed in a secure manner you must ensure that
access is closed to the public!
5.1
Marking the filling level
•
Markings on the equipment to indicate filling levels of fall protection material
(for example of loose filling material).
5.2
In the following cases the equipment is not yet safely installed:
•
safe installation of the equipment is not fully completed
•
impact absorbing surface is not installed yet
•
the upkeep of occupational safety through appropriate maintenance can not
be guaranteed.
5.3
Removing assembly accessories
•
Please make sure that all accessories, which were used for the installation of
the equipment, are removed from the play area! Only then the equipment can
be declared open.
5.4
Details concerning inspection of the equipment prior to the first
use
•
No acceptance test specifications apply prior to first use.
5.5
Retighten bolts
•
Please retighten all bots after one week of initial use. Later, it is sufficient to
retighten the bolts upon respective maintenance.
Page 39 von 51
Kübler Sport · Karl-Ferdindand-Braun-Straße 3 · D-71522 Backnang · www.kuebler-sport.com
