Kübler CODIX 924-6, Manual

Page: 42 / 132

www.kuebler.com Page 16
Approx. 3 s after the last press of
the decade keys or by pressing
the Reset key the new preset
value will be accepted and the
counter will switch back to
operating mode.
7.9.2 Setting with Teach-In Function
Program the MPI input to
tEAch
In programming mode, select the
preset to be changed using the
Prog/Mode key
Briefly activate the MPI (NPN or PNP input logic)
Õ
The current count value will be adopted as
the new preset value
The preset value can subsequently be
further modified via the decade keypad.
Both the pulse counter and the timer can be set to
a default value by means of the Set function.
Programme the MPI input to
SEt
Set menu item
SEtPt
to the
desired value
Briefly activate the MPI (NPN or PNP input logic)
Õ
For add. output operations the pulse
counter or timer will be set to the
SEtPt
default value
Õ
For sub. output operations the pulse
counter or timer will be set to the
difference between the value of Preset 2
and the value of
SEtPt
.
Err 1 Set value is outside the permitted range
N° Designation Function
1 AC: 24 VDC/80 mA
DC: U
B
connected
through
Sensor supply
voltage
2 GND (0 VDC) Common connection
Signal and Control
inputs
3 INP A Signal input A
4 INP B Signal input B
5 RESET Reset input
6 LOCK Keypad lock
7 GATE Gate input
8 MPI User input
N° Designation Function
9 Collector 1
10 Emitter 1
Output 1
11 Emitter 2
12 Not connected
13 Collector 2
Output 2
14 AC: 90..260 VAC N~
DC: 10..30 VDC
Supply voltage
15 AC: 90..260 VAC L~
DC: GND (0 VDC)
Supply voltage
16 Common-Emitter Output 3 to 6
17 Collector 6 Output 6
18 Collector 5 Output 5
19 Collector 4 Output 4
20 Collector 3 Output 3