Kübler 573T, Operating Manual

Page: 43 / 76

R60726.0002 – Index 6b EN - page 43
Continuation „ Display Menu“:
SOURCE DUAL DOWN (Reference source for two-line display, second line)
0 INPUT 1
the reference source is input 1
1 INPUT 2
the reference source is input 2
2 LINKAGE 1 – 2 the reference source is the result of the linking of input1 and input 2
3 INPUT 1 TOTAL
the reference source is input 1 with totalization
4 INPUT 2 TOTAL
the reference source is input 2 with totalization
5 LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2
with totalization
6 IO LINK VALUE 1
the reference source is the process data out value 1 sent by the IO-
Link master
7 IO LINK VALUE 2
the reference source is the process data out value 2 sent by the IO-
Link master
8 MINIMUM VALUE 1 minimum value, the reference source is input 1
9 MAXIMUM VALUE 1 maximum value, he reference source is input 1
10 MINIMUM VALUE 2 minimum value, the reference source is input 2
11 MAXIMUM VALUE 2 maximum value, he reference source is input 2
LARGE DISPLAY
This parameter is used to turn on or off the large display window. Using the divider ratio, the large
display value can also be divided.
0 NO Large display is switched off
1 1:1 Large display with divider ratio 1:1
2 1:10 Large display with divider ratio 1:10
3 1:100 Large display with divider ratio 1:100
4 1:1000 Large display with divider ratio 1:1000
5 1:10000 Large display with divider ratio 1:10000
SOURCE LARGE (Reference source for large display)
Parameter only visible with activated parameter "LARGE DISPLAY".
0 INPUT 1
the reference source is input 1
1 INPUT 2
the reference source is input 2
2 LINKAGE 1 – 2 the reference source is the result of the linking of input1 and input 2
3 INPUT 1 TOTAL
the reference source is input 1 with totalization
4 INPUT 2 TOTAL
the reference source is input 2 with totalization
5 LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2
with totalization
6 IO LINK VALUE 1
the reference source is the process data out value 1 sent by the IO-
Link master
7 IO LINK VALUE 2
the reference source is the process data out value 2 sent by the IO-
Link master
8 MINIMUM VALUE 1 minimum value, the reference source is input 1
9 MAXIMUM VALUE 1 maximum value, the reference source is input 1
10 MINIMUM VALUE 2 minimum value, the reference source is input 2
11 MAXIMUM VALUE 2 maximum value, the reference source is input 2
The totalization depends on the operation mode. See chart in chapter IN 1 Totalization.