Kuberg X-FORCE PRO 50 2017 Owner'S Manual Download Page 27

27

LIMITED WARRANTY

KUBERG motorcycles are warranted to the 

original retail purchaser to be free from 

defects in materials and workmanship in the 

frame and components except for batteries, 

tires, and inner tubes for a period of thirty (30) 

days from the date of purchase. Batteries are 

warranted to the original retail purchaser to be 

free from defects in materials and workman-

ship for a period of thirty (30) days from the 

date of purchase. Tires and tubes are warrant-

ed to be free of manufacturing and material 

defects for thirty (30) days. Such tire and tube 

warranty shall not include flat tires, tire cuts, 

skid through, over-inflation blowouts, or other 

such misuse or normal hazards. Warranties are 

limited to repair and/or replacement of bike 

and/or parts found by KUBERG to be defective, 

at the sole discretion of KUBERG.

 

KUBERG Limited Warranty does not cover or 

apply to the following: normal wear and tear; 

any damage, failure and/or loss caused by 

accident, shipping, misuse, neglect, abuse and/ 

or failure to follow instructions or warnings as 

stated in the applicable owner’s manual or oth-

er printed materials provided with the product; 

damage, failure and/or loss caused by the use 

of the product for stunt riding, ramp jumping, 

speed competition, inappropriate off-road

use, acrobatics, trick riding or other similar 

activities, or in any other manner for which 

such products were not specifically designed. 

This warranty does not apply to any products 

or components, mechanical and/or electrical, 

which have in any way been altered from their 

original configuration by any person. KUBERG 

will not be liable and/or responsible for any 

damage, failure or loss caused by any unautho-

rized service or use of unauthorized parts.

 

KUBERG Limited Warranty does not cover or 

apply to any KUBERG product used for rental 

or commercial purposes unless the specific 

product is designated, labeled, or marketed by 

KUBERG as acceptable for rental or commer-

cial use. All warranty claims must be made 

directly to selling retailer. The selling retailer 

is the primary provider of warranty support 

and customer service. KUBERG may choose to 

perform warranty service at the sole discretion 

of KUBERG. The original owner of the prod-

uct must provide proof of purchase prior to 

approval of any warranty claim. Under no cir-

cumstances does this limited warranty include 

any costs associated with shipment and/or 

transportation to or from retailer, distributor 

or KUBERG. KUBERG, at its sole discretion, has 

the option of replacing with a new part, a fac-

tory recertified part, or repairing any defective 

product and/or component thereof, or to pay 

to the owner of such product an amount equal 

to the original purchase price of such product. 

The original owner shall pay for all costs of 

labor associated with any warranty claims. This 

warranty supersedes all previous warranties. 

The warranties stated herein are in lieu of 

and expressly exclude all other warranties not 

expressly set forth herein, whether expressed 

or implied by law or otherwise, including, but 

not limited to, any warranties for merchantabi-

lity and/or fitness for any particular purpose. 

KUBERG shall in no event be liable or respon-

sible for incidental or consequential losses, 

damages or expenses in connection with their 

electric dirt bike products.

The liability of KUBERG hereunder is expressly 

limited to the replacement of goods comply-

ing with this warranty or at the sole election 

of KUBERG to the repayment of an amount 

equivalent to the purchase price of the product 

in question. 

  

CAUTION!

Some states may not permit the exclusion 

or limitation of consequential damages and 

therefore, such limitations may not apply to 

the consumer in which such impermissible 

exclusions are involved. 

Contact information on the back cover.

Summary of Contents for X-FORCE PRO 50 2017





























Reviews: