21
WARNING: NEVER SHORT CIRCUIT THE DISCHARGE TERMINALS OF THE BATTERY
A short circuit will damage the battery and may cause a fire resulting in severe injury or death,
and/or damage to property.
WARNING!
Never manipulate the battery, never open the battery pack and do not puncture the battery cover
or the battery itself.
CAUTION!
Keep the battery away from excessive heat and/or open flames. Avoid long term exposure to
direct rays from the sun.
CAUTION!
Protect the batteries from water or other moisture. If the batteries become wet from rain during
use, dry as soon as possible. Remove the batteries from the bike before washing.
CAUTION!
To avoid damage to the battery, never subject it to intense physical shock or severe vibration.
CHARGING INSTRUCTIONS
Always follow these steps when charging your KUBERG X-Force Pro 50.
1
Make sure your KUBERG is turned OFF.
2
Connect your charger to an electrical outlet (AC).
3
Turn on the power switch on the charger.
4
Wait for 30 seconds.
5
Connect the charger cable to the battery connector on your bike.
CAUTION!
If the charger is plugged into the bike with the charger switched OFF, a potential in-rush of
electrical current from the bike’s battery to the charger may damage the charger.
The recommended charging time for a fully discharged battery is 2.5 hours.
After 1.5 hours of charging, the battery should be charged to about 80% capacity.
After 2.5 hours, the battery should be charged to 99% capacity.
WARNING!
Only use the supplied battery charger. Using any other battery charger will void the warranty and
may damage the battery.
The LED light on the charger will illuminate RED while charging.
The LED light on the charger will illuminate GREEN when the battery is fully charged.
CAUTION!
The battery charger supplied with your KUBERG X-Force Pro 50 is for INDOOR use only.