F
ORCED
T
WO
B
UTTON
M
ODE
You can enable a forced two button mode which means that the gamepad will not switch
to CD32 mode even if the Amiga sets pin 5 of the joystick port to 0V (this would normally
put the gamepad into CD32 mode). This might help with some rare games where the
buttons don't work with the CD32 gamepad.
KTRL CD32 Rev.1 needs firmware version 1.0.3 for this feature.
To toggle forced two button mode on KTRL CD32 Rev.2,
press and hold [[start]
,
then
press [down]
.
On KTRL CD32 Rev.1/2 you can enable the forced two button mode if you h
old [blue]
button
when the controller is plugged in and you power on the Amiga.
The mode is saved when saving a preset and the mode will go back to normal if you reset
to default settings (see above).
