KTR Kupplungstechnik
GmbH
D-48407 Rheine
NVT-E
Operating-/Assembly Instructions
KTR-N
Sheet:
Edition:
42611 EN
13 of 27
1
Please note protection
mark ISO 16016.
Drawn:
11.10.12 Pz/Wy
Replaced for:
---
Verified:
19.11.12 Pz
Replaced by:
4 Operation
4.6 Amendment of Basic Settings
4.6.7 Maximum Displayed Value of Charging Level
The displayed value (upper limit of the measurement range) for the maxium charging level is defined here.
Setting range:
-999…9999
Assignment of the maximum displayed value (upper limit of the measurement
range) towards the maximum charging level
Please note:
To prevent misoperation, the settings of the level outputs should be reviewed or
adapted after changing.
4.6.8 Minimum Displayed Value of Charging Level
The displayed value (lower limit of the measurement range) for the minimum charging level is defined here.
Setting range:
-999…9999
Assignment of the maximum displayed value (upper limit of the measurement
range) towards the maximum charging level
Please note:
To prevent misoperation, the settings of the level outputs should be reviewed or
adapted after changing.
4.6.9 Resetting Factory Settings (Reset)
The function
Reset
(
) allows to reset the factory settings. Since the limit values are reset, too, it is not
absolutely necessary to review the settings for the charging level and the temperature.
!
C A U T I O N !
All modifications are lost when using the function RESET.
The following menu items are available:
Delivery status: NO.
The current settings are kept.
Delivery status: Yes.
The settings are reset to the standard
factory settings.
