KTR Kupplungstechnik
GmbH
D-48407 Rheine
BoWex-ELASTIC
®
Operating/Assembly Instructions
Type HEW and HEW-ZS
KTR-N
Sheet:
Edition:
40114 EN
2 of 20
5
Drawn:
08.11.11 Pz/Hk
Replaced for:
KTR-N valid from 08.04.04
Please note protection
mark ISO 16016.
Verified:
09.11.11 Pz
Replaced by:
The
BoWex-ELASTIC
®
HEW
is a high flexible plug-in shaft coupling. It dampens torsional
oscillations, decreases shocks and is impact sound insulating.
The
BoWex-ELASTIC
®
HEW
coupling compensates for relatively considerable shaft
displacements caused by e. g. inaccuracies in production, heat expansion etc.
Table of Contents
1 Technical
Data
2 Hints
2.1
Coupling
Selection
2.2
General
Hints
2.3 Safety and Advice Hints
2.4 General Hints to Danger
2.5
Proper
Use
3 Storage
4 Assembly
4.1 Components of the Couplings
4.2 Hint Regarding the Finish Bore
4.3 Assembly of the Coupling
4.4 Displacements - Alignment of the Couplings
4.5 Spares Inventory, Customer Service Addresses
5 Enclosure
A
Hints and instructions regarding the use in
hazardous areas
5.1 Use
in
Hazardous Areas According to the Regulations
5.2 Control intervals for couplings in
hazardous areas
5.3 Checking of torsional backlash
5.4 Approximate values of wear
5.5
Marking of coupling for the hazardous area
5.6
Starting
5.7 Breakdowns, causes and elimination
5.8 Certificate of Conformity according to the EG Standards 94/9/EG
dated 23 March 1994
