KTR-STOP
®
S-xx-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
44590 EN
7 of 26
3
Please observe protection
note ISO 16016.
Drawn:
2018-09-10 Shg/Wie
Replacing:
KTR-N dated 2018-02-07
Verified:
2018-09-10 Shg
Replaced by:
The brake is supplied in pre-assembled condition. Before assembly the brake has to be inspected for completen-
ess.
The brake is generally supplied with the transport lock mounted.
The screw plug (component 1.20) is attached to the brake in bulk.
Components/component assemblies of brake
– Type S-xx-F B-xx
Compo-
nent/suba
ssembly
Quantity
Description
1
1
Caliper with components
2
1)
Distance plate
3
1
Base plate with
guide pin
4
2
Centering system outside
5
1
Centering system inside
6
2
Pad retraction set movable
side
7
2
Brake pad
8
2
Pad retraction set on fixed
side
9
1
2)
Sensor
1) Number depends on thickness of brake disk.
2) Optionally available
Illustration 4: Components/subassemblies of brake
Component 2: Number and position of the spacer plate
Thickness of brake
disk
Number of spacer plates
On top
(Pos.2a)
At the bot-
tom (Pos.2b)
20
1
1
30
1
-
40
-
-
4
Assembly
4.1 Components of the brake
