ROTEX
®
SP "Non Sparking"
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
40228 EN
16 of 28
6
Please observe protection
note ISO 16016.
Drawn:
2019-10-10 Pz/Bru
Replacing:
KTR-N dated 2017-01-02
Verified:
2019-10-10 Pz
Replaced by:
•
Remove the half shells from the hub body (see illustration 19).
•
Fit the hub bodies together with the spiders and DKM spacer SP (see illustration 20).
•
Mount the fitted unit along with the shells and the clamping screws onto the shaft ends of the driving and
driven machine (see illustration 21).
•
Hand-tighten the components first until the hub bodies with the half shells fit closely to the shaft.
•
Shift the DH clamping hubs in axial direction until the dimension L
total
is achieved (see illustration 22 and
table 7).
•
Secure the DH clamping hubs by tightening the clamping screws reciprocally. The screws have to be tightened
at the tightening torques T
A
specified in table 10 by means of a suitable torque wrench.
!
Having started up the coupling the tightening torques of the screws have to be inspected
during the usual inspection intervals.
Illustration 19: Disassembly of shells
Illustration 20: Assembly of hub bodies,
spiders and DKM spacer SP
Illustration 21: Assembly of component assembly
onto the shafts
Illustration 22: Assembly of coupling
4
Assembly
4.6 Assembly of type ZS-DKM-C
