KTM rc8 r Owner'S Manual Download

Page: 220 / 272

SERVICE WORK ON THE ENGINE

218

17.2

Changing engine oil and filter, cleaning oil screen

500281-01

–

Drain the engine oil and clean the oil screens.

(

p. 218)

–

Fill up with engine oil.

(

p. 223)

17.3

Draining engine oil, cleaning oil screens

Warning

Danger of scalding

Engine oil and gear oil get very hot when the motorcycle is ridden.

–

Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Drain the engine oil only when the engine is warm.

Summary of Contents for rc8 r

















































































































































































































































































Search results

Summary of Contents for rc8 r

Reviews:

Related manuals for rc8 r

Brands by name

Popular brands

KTM rc8 r, Owner'S Manual

Search results

Summary of Contents for rc8 r

Reviews:

Related manuals for rc8 r

Brands by name

Popular brands