KTM RC 125, Owner'S Manual

Page: 145 / 211

15 ELECTRICAL SYSTEM
143
15.7 Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
L02162-10
Main work
–
Turn socket

counterclockwise.
–
Pull the socket with high beam bulb

out of the headlight housing.
–
Disconnect the socket with the high beam bulb from connector  and remove.
–
Connect the new socket with the high beam bulb to the connector.
High beam (H9/socket PGJ19-5) ( p. 188)