KTM RC 125, Owner'S Manual

Page: 122 / 211

14 WHEELS, TIRES
120
L02183-11
(RC 125)
–
Remove spacers  .
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease the shaft seal rings

and mating surfaces

of the spacers.
Long-life grease ( p. 198)
–
Insert the spacers.
L02182-11
–
Clean the thread of the wheel spindle and screw

.
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M8 26 Nm
(19.2 lbf ft)
–
Position wheel speed sensor

in the drill hole. Mount and tighten screw

.
Guideline
Screw, wheel speed sensor holder M6 8 Nm (5.9 lbf ft)
–
Mount and tighten screws

.
–
Operate the hand brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point.
–
Take the motorcycle off of the front wheel stand. ( p. 80)
–
Pull the front brake and compress the fork forcefully a few times.
The fork legs straighten.