4 WORK
36
4.25
Setting the clock
Condition
The motorcycle is stationary.
400330-01
–
Repeatedly press the button
briefly until
CLK
appears at the
bottom right of the display.
–
Press the button
for 2
–
3 seconds.
The hour display flashes.
–
Adjust the hour display with the button
and/or button .
–
Wait 3 - 5 seconds.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the
hours by pressing the button
and the button .
Info
The seconds can only be set to zero.
If no button is pressed for 15
–
20 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
4.26
Ascertaining that the KTM PowerPack is at zero potential
Warning
Risk of injury
The measuring points could be live.
–
Use personal protective clothing and comply with the safety measures.
Condition
The KTM PowerPack has been removed.
309699-10
Main work
–
Prepare the special tool for measurement.
AVL DITEST HV Safety 2000 (70029068000)
–
Start software
HV Safety
.
–
Select
"Zero-potential"
.
–
Follow the instructions in the
HV Safety
Owner's Manual.
Finishing work
–
Mount the protection cap.
