KTM Freeride E-XC 2018, Owner'S Manual

Page: 91 / 146

14 WHEELS, TIRES
89
14.5 Checking the tire condition
Info
Only mount tires approved and/or recommended by KTM.
Other tires could have a negative effect on handling characteristics.
The type, condition, and air pressure of the tires all have a major impact on the handling of the motorcy-
cle.
The tires mounted on the front and rear wheels must have a similar profile.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
400602-10
–
Check the front and rear tires for cuts, run-in objects, and
other damage.
» If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
–
Check the tread depth.
Info
Observe the minimum profile depth required by
national law.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum tread depth:
–
Change the tires.
H01144-01
–
Check the tire age.
Info
The tire's date of manufacture is usually part of the tire
markings and is indicated by four digits. The first two
digits indicate the week of manufacture and the last
two digits the year of manufacture.
KTM recommends that the tires be changed after 5
years at the latest, regardless of the actual state of
wear.
» If the tires are more than 5 years old:
–
Change the tires.
14.6 Checking the tire air pressure
Info
Low tire air pressure leads to abnormal wear and overheating of the tire.
Correct tire air pressure ensures optimal riding comfort and maximum tire service life.
Preparatory work
–
Deactivate the vehicle. ( p. 37)
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. ( p. 102)
–
Mount the covering cap. ( p. 65)