CONTROLS
17
5.23
Display mode SPEED/TR2 (trip master 2)
400324-01
–
Press the button
briefly and repeatedly until
TR2
appears at the top right of the
display.
TR2
(trip master 2) runs constantly and counts up to 999.9.
The displayed value can be set manually with the button
and the button . This is a
very practical function when riding using the road book.
Info
The
TR2
value can also be corrected manually during the journey with the but-
ton
and the button .
If 999.9 is exceeded, the value of
TR2
is automatically reset to 0.0.
Press the button . Increases value of
TR2
.
Press the button . Reduces value of
TR2
.
Press the button
for 3 - 5 seconds.
Deletes value of
TR2
.
Press the button
briefly.
Next display mode
5.24
Display mode SPEED/A1 (average speed 1)
400325-01
–
Press the button
briefly and repeatedly until
A1
appears at the top right of the
display.
A1
(average speed 1) shows the average speed calculated on the basis of
TR1
(trip mas-
ter 1) and
S1
(stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
The
TR1
,
A1
and
S1
displays are reset to 0.0.
Press the button
briefly.
Next display mode
5.25
Display mode SPEED/A2 (average speed 2)
400326-01
–
Press the button
briefly and repeatedly until
A2
appears at the top right of the
display.
A2
(average speed 2) shows the average speed on the basis of the current speed if the
stop watch
S2
(stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if
S2
was not
timed after the ride.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
–
Press the button
briefly.
Next display mode
Summary of Contents for Freeride 350
Page 1: ...OWNER S MANUAL 2012 Freeride 350 Art no 3211720en...
Page 2: ......
