4
SERVICE WORK ON THE CHASSIS
9
4.1
Raising the motorcycle with the lift stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
B01029-10
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
–
Secure the motorcycle against falling over.
4.2
Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
602798-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, fold side stand
down to the ground with your foot and
rest the motorcycle on it.
Info
While riding, the side stand must be folded up and secured with the rubber
band.
4.3
Installing the shock absorber
B01053-11
Main work
–
Push splash protector
to the side and position the shock absorber. Mount and
tighten screw
.
Guideline
Screw, top shock absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
243™
–
Mount and tighten screw
.
Guideline
Screw, bottom shock
absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
243™
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
–
Mount and tighten screw
.
Guideline
Screw, upper subframe
M10
45 Nm
(33.2 lbf ft)
Loctite
®
243™
Finishing work
–
Lock the seat. (
–
Remove the motorcycle from the lift stand. (
