
4
SERVICE WORK ON THE CHASSIS
11
4.6
Locking the seat
B01022-10
–
Fold down the seat and push it down.
The seat engages with an audible click.
–
Finally, check that the seat is correctly locked.
4.7
Removing the fuel tank
Danger
Fire hazard
Fuel is highly flammable.
–
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
Warning
Danger of poisoning
Fuel is poisonous and a health hazard.
–
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with
the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with
soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.
Store fuel properly in a suitable canister and keep away from children.
Preparatory work
–
Fold the seat up. (
B01074-10
Main work
–
Thoroughly clean the plug-in connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter the fuel line. Dirt in the fuel line
clogs the injection valve.
–
Disconnect the plug-in connection of the fuel line.
–
Mount wash cap set
.
Wash cap set (81212016000)
B01075-10
–
Remove the tube from the fuel tank breather.
–
Remove screws
on both sides.
–
Remove screw
.
B01076-10
–
Disconnect connector
.
–
Pull off engine breather hose
.