4
SERVICE WORK ON THE CHASSIS
10
4.4
Installing the front wheel
Warning
Danger of accidents
Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
B01046-11
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease the shaft seal rings
and contact surface
of the spacers.
Long-life grease (
–
Insert the spacers.
B01044-11
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
.
Guideline
Screw, front wheel spindle
M20x1.5
35 Nm
(25.8 lbf ft)
–
Activate the hand brake lever multiple times until the brake linings are in contact
with the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
–
Tighten screw
.
Guideline
Screw, fork stub
M8
15 Nm
(11.1 lbf ft)
4.5
Folding the seat up
B01021-10
–
Press release lever
.
–
Lift the seat and fold it up.
