SERVICE WORK ON THE CHASSIS 12
55
F01202-10
–
Remove screws
3
on the right fork leg. Take off the fork pro-
tector.
12.6
Installing the fork protector
F01202-11
–
Position the fork protection on the right fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
F01187-11
–
Position the fork protection on the left fork leg. Mount and
tighten screws
2
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
3
.
12.7
Removing the fork legs
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
F01199-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove the cable tie(s) and detach plug-in connector
2
.
–
Remove screws
3
with the spacers and take off the brake
caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Summary of Contents for Freeride 250 F 2018
Page 1: ...OWNER S MANUAL 2018 Freeride 250 F Art no 3213652en ...
Page 2: ......