KTM Freeride 250 F 2018, Owner'S Manual

Page: 72 / 157

12 SERVICE WORK ON THE CHASSIS
70
B01068-10
Main work
–
Remove screws 1 .
–
Take off connecting cap
2
.
–
Remove the silencer cap
3
together with the perforated pipe
and glass fiber yarn fillings
4
and
5
.
–
Clean the parts that need to be reinstalled and check for dam-
age.
–
Mount the new glass fiber yarn fillings
4
and
5
on the per-
forated pipe.
–
Position the silencer cap with the perforated pipe 3 in the
outer tube.
–
Position the connection cap
2
.
–
Mount and tighten screws 1 .
Guideline
Screws on the main
silencer M5 7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. ( p. 69)
12.30 Removing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
Preparatory work
–
Fold the seat up. ( p. 64)