KTM Freeride 250 F 2018, Owner'S Manual

Page: 20 / 157

6 CONTROLS
18
Preparatory work
–
Fold the seat up. ( p. 64)
E00979-10
Main work
–
Press release button
1
, turn the filler cap counterclockwise,
and lift it free.
6.12 Closing the filler cap
E00978-10
Main work
–
Replace the filler cap and turn clockwise until the release but-
ton
1
locks in place.
Info
Run the fuel tank breather hose
2
without kinks.
Finishing work
–
Lock the seat. ( p. 64)
6.13 Cold start button
H02565-10
The cold start button 1 is fitted on the bottom of the throttle
valve body.
The injection system extends the injection time if the engine is
cold and the outside temperature is low. To help the engine burn
the increased amount of fuel, it must be supplied with additional
oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle
grip again, or turning the throttle grip towards the front, the cold
start button returns to its original position.
Info
Check whether the cold start button has returned to its
basic position.
Possible states
• The cold start button is activated
–
The cold start button is
pushed in all the way.
• The cold start button is deactivated
–
The cold start button is
in its basic position.