KTM F9903Q4, Setup Instructions

Page: 15 / 19

3 WORK
13
3.14 Checking the headlight setting
400726-10
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
B
under the first mark.
Guideline
Distance B
5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance
A
from the wall and
switch on the low beam.
Guideline
Distance
A
5 m (16 ft)
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle
is ready to operate with the rider mounted along with any luggage and a passen-
ger if applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. ( p. 13)
3.15 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 13)
F00892-10
Main work
–
Turn adjusting wheel
1
to adjust the headlight range.
Info
Turn counterclockwise to increase the headlight range; turn clockwise to
reduce the headlight range.
If you have a payload, you may have to correct the headlight range.
400726-11
–
Set the headlight to marking B .
Guideline
The light-dark boundary must lie exactly on lower mark
B
when the motorcycle
is ready to operate with the rider mounted along with any luggage and a passen-
ger if applicable.