KTM F8203S2, Setup Instructions

Page: 38 / 48

3 WORK
36
3.19 Checking throttle cable routing
Preparatory work
–
Remove the seat. ( p. 27)
–
Remove the fuel tank. ( p. 32)
E00392-01
Main work
(EXC
‑
F EU/AU/BR, All Six Days models)
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars and above the fuel tank bracket,
to the throttle valve body. Both throttle cables must be
secured behind the fuel tank contact area rubber band.
» If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
E00502-01
(EXC-F US)
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars and above the fuel tank bracket,
to the throttle valve body. Both throttle cables must be
secured behind the fuel tank contact area rubber band.
» If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
Finishing work
–
Install the fuel tank. ( p. 34)
–
Mount the seat. ( p. 27)