WORK 3
35
K00558-11
–
Position the horn with the horn bracket.
–
Mount and tighten screws
2
with the collar bushings.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
K00560-10
(EXC
‑
F EU/AU/BR, All Six Days models)
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line
using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
valve!
–
Lubricate the O-ring and connect plug-in connection
4
for the fuel line.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
E00509-10
(EXC-F US)
–
Plug in connector
3
for the fuel pump.
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line
using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
valve!
–
Lubricate the O-ring and connect plug-in connection
4
for the fuel line.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
Finishing work
–
Mount the seat. (
