KTM F7103Q3, Setup Instructions

Page: 16 / 37

2 SETUP
14
S01399-10
–
Position spring as shown.
Spring

engages in area

.
S01400-11
–
Press the spring with special tool

.
Pliers for footrest spring (79029083000)
The special tool is applied to area

on the footrest.
–
Mount pin

.
S01401-11
–
Mount the washer and split pin

.
S01468-10
–
Position the frame protectors on both sides.
–
Mount and tighten screws

.
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
–
Mount and tighten screws

with the washers.
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
–
Mount the cable tie(s).
(All Six Days models, EXC AU)
–
Install the engine guard. ( p. 26)
–
Unpack and mount the KTM PowerParts included in the delivery (optional).
Info
Read the accompanying KTM PowerParts fitting instructions.
–
Apply the sticker included in the delivery (optional).
–
Set kilometers or miles. ( p. 28)
–
Set the speedometer functions. ( p. 28)
–
Set the clock. ( p. 29)
–
Refuel. ( p. 27)