KTM F4303U1, Owner'S Manual

Page: 84 / 130

15 ELECTRICAL SYSTEM
82
V01273-10
Main work
–
Disconnect negative cable
1
from the 12-V battery.
V01274-10
–
Pull back positive terminal cover
2
.
–
Disconnect positive cable
3
from the 12-V battery.
–
Detach rubber strap
4
.
–
Pull the 12-V battery upwards and out of the battery compart-
ment.
Info
Never operate the motorcycle with a discharged 12-V
battery or without a 12-V battery. In both cases, elec-
trical components and safety devices can be damaged.
The vehicle will therefore no longer be roadworthy.
15.3 Installing the 12-V battery
V01274-11
Main work
–
Position the 12-V battery in the battery compartment.
12-V battery (ETZ
‑
9
‑
BS) ( p. 112)
–
Attach rubber strap
1
.
–
Position positive cable
2
and mount and tighten the screw.
–
Position positive terminal cover
3
.
V01273-11
–
Position negative cable
4
; mount and tighten the screw.
Finishing work
–
Mount the front rider's seat. ( p. 59)
–
Mount the passenger seat. ( p. 58)
–
Set time and date. ( p. 37)