KTM bikepass, User Manual

Page: 26 / 36

26
As a basic principle every frame including the fork has
to undergo a close and periodic visual inspection for
damages (e.g. cracks, colour changes, etc.). Impact
loads can lead to damages not visible from the out-
side like delamination (dissolution of the fibres from
the surrounding polymer matrix) in the lower layers
of the laminate which drastically reduce capacity and
therefore also safety. After accidents, crashes, or simi-
lar mechanical loads, frame and fork cannot be ridden
anymore for safety reasons.
Adhere to the relevant manufacturer’s directions of use
for the mounted accessories! Carbon parts, e.g. hand-
lebars, can delaminate if screw joints on collars are
fastened too tight. Observe the specified tightening
torques or ask your specialist dealer.
Mounting
Please only use accessories and components appro-
ved for use with carbon frames and featuring the cor-
rect size. Please only use appropriate special tools for
all mounting work. Please strictly observe the specified
torque specifications for all mounting work.
Mounting areas (seat tube, head tube, etc.) must not
be greased. Seat tube and bearing seats must not be
countersunk, copy-milled, or machined in any other
way.
KTM carbon frames are not suited for use on so called
trainers (e.g. by Elite). Use on rollers without mounts is
possible. Never use transport systems and assembly
stands with clamping holders. The frame can get da-
maged or put beyond use by the untypical loads of the
clamping mechanism.
Care and Cleaning of Aluminium and Carbon
Only use commercially available care products for
paints and cold or lukewarm water in combination with
washing-up liquid. Never clean carbon with solvents,
alcohol, hot water with alkaline additives, and high-
pressure cleaners.
Handling of Carbon