KTM 990 SupermotoR, Owner'S Manual

Page: 84 / 208

SERVICE WORK ON THE CHASSIS
82
10.7
Mounting the seat
101139-10
–
Position front recesses

of the seat on the oval head screws of the fuel tank, lower
the rear and simultaneously push it forward. Both lugs

must hook into the frame and
locking bolt

must be inserted into the lock housing.
The seat engages with an audible click.
–
Finally, check that the seat is correctly mounted.
10.8
Mounting the helmet lock on the vehicle
Warning
Danger of accidents
Impairment of ride behavior and vehicle operation if a helmet or helmet lock is attached to the vehicle.
–
Do not use the helmet lock for holding a helmet or other objects during the journey. Always remove the helmet lock before start-
ing out.
101140-10
–
Remove the seat. ( p. 81)
–
Position the steel cable from the tool set with one loop on the lug

.
Steel cable (60012015000)
–
Guide the steel cable through the helmet opening.
–
Then position the free loop of the steel cable on the lug.
–
Position the helmet carefully on the side of the vehicle.
–
Mount the seat. ( p. 82)