KTM 990 Supermoto R Owner'S Manual Download

Page: 87 / 220

MAINTENANCE WORK ON FRAME AND ENGINE

(Supermoto T)

Compression damping, high-speed

Comfort

2 turns

Standard

1.5 turns

Sport

1 turn

Full payload

1 turn

Info

Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.

9.13

Adjusting the rebound damping of the shock absorber

Danger

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)

B00126-10

–

Turn adjusting screw



clockwise up to the last perceptible click.

–

Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.

Summary of Contents for 990 Supermoto R





























































































































































































































Search results

Summary of Contents for 990 Supermoto R

Reviews:

Related manuals for 990 Supermoto R

Brands by name

Popular brands

KTM 990 Supermoto R, Owner'S Manual

Search results

Summary of Contents for 990 Supermoto R

Reviews:

Related manuals for 990 Supermoto R

Brands by name

Popular brands